West Coast Time
Terms and Conditions
Cases and Hardware
Rack Drawers and Hardware
> 14" SRD Rack Mount Rack Drawers
Click to Enlarge
SRD3U (3U High) Rack Drawer Shown Above
14" SRD Rack Mount Rack Drawers
Choose Drawer Height
SRD2U | 2 space - $55.00
SRD3U | 3 space - $60.00
SRD4U | 4 space - $65.00
SRD5U | 5 space - $70.00
SRD6U | 6 space - $75.00
Add to Cart
Add to Wish List
These are the EWI Tourcase tm Model SRD rack drawers. Now available in 5 models:
2U (3.50") high
3U (5.25") high
4U (7.00") high
5U (8.75") high
6U (10.50") high
These are basic metal rack drawers, suitable for mounting in conventional 19" racks.
The slide-out drawer is constructed with 0.047 (18 gauge) sheet metal. The outer shell is constructed with 0.075 (14 gauge) sheet metal. The drawer slides are steel construction with ball bearing rollers, so they glide nice and smooth.
These drawers are equipped with a spring loaded "finger latch" on the front of the drawer for opening and closing the drawer. In addition to the "finger latch", there is a key lock on the front of the drawer to secure the drawer shut. Two keys for the lock are included with each drawer.
The finish is matt black powder coating. The inside of the drawers are unlined (bare black powder coated metal).
The back of the drawer shell is equipped with slotted ears which are intended for use if back supporting the drawer in a rack is desired. Rack mounting brackets are available as an add-on option for use with the shell ears. For dimensions and additional information concerning the mounting brackets
Welded steel construction
Robust, but not super heavy duty (or super heavy)
Drawer encased in outer shell (so all your stuff won't fall out if the drawer ends up upside-down)
Pull-out drawer for conventional 19" racks
Inside dimensions of drawers:
Left to Right: 16" (all models)
Front to Back excluding "finger latch" inset: 13 1/2" (all models)
Front to Back including "finger latch" inset: 12 3/4"
SRD2U: 2 7/8"
SRD3U: 4 5/8"
SRD4U: 6 3/8"
SRD5U: 8 1/8"
SRD6U: 9 7/8"
Left to Right measured at rack ears: 19" (all models)
Left to Right measured at outer shell body: 17 1/4" (all models)
Front to Back measured from front of drawer to back of rear support ears: 15" (all models)
SRD2U: 3 1/2"
SRD3U: 5 1/4"
SRD5U: 8 3/4"
SRD6U: 10 1/2"
SRD2U: 12 lbs.
SRD3U: 14 lbs.
SRD4U: 16 lbs.
SRD5U: 20 lbs.
SRD6U: 22 lbs.
SRD2U: 16 lbs.
SRD3U: 21 lbs.
SRD4U: 25 lbs. (Dimensional)
SRD5U: 27 lbs. (Dimensional)
SRD6U: 33 lbs. (Dimensional)
Color: Matt Black (powder coat)
Warranty: 1 year covering mfg. defects.
PPF | Pick & Pluck Foam Sets for Various Cases
ERD | Rear Support Brackets
Recently Viewed Items