Cases and Hardware
Road Racks and Cases
RUE Series Amp or Effects Rack Cases
> R2UE-12 | 2 space x 12" rack depth 2 Lid Effects Rack Case
Click to Enlarge
R2UE-12 | 2 space x 12' rack depth 2 Lid Effects Rack Case
R2UE-12 | 2 space x 12" rack depth 2 Lid Effects Rack Case
Add to Cart
Add to Wish List
This is the EWI Tourcase tm Model R2UE-12 rack case which has a 12" rack depth measured from the front rack rails to the rear rack rails. The rails are 2U (3.5") in height and are drilled and tapped for standard #10 x 32 racking screws. This rack is suitable for shallow depth, 19" wide rack gear.
The R2UE-12 side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The extrusion is all aluminum and the case is assembled with aluminum rivets. The rivets on the 2 surface mounted padded flip handles are backed with washers to ensure strength and durability. Mounted on the bottom of the case are 4 solid rubberized feet.
The case is equipped with two removable lids. Each lid has four heavy duty ball corners and the inside of the RUE series lids are fully padded with medium density foam rubber. The lids are secured to the case using 2 medium sized recessed butterfly latches. Either lid will fit on either side of the case, right-side up or upside down.
These are well made heavy duty cases manufactured to exacting tolerances and suitable for a variety of racking applications.
Designed for standard 19" rack mount equipment
2U (3.5") rack height
12" Front rail to back rail rack depth
Tough 3/8" plywood and ABS laminate panels
Recessed butterfly latches and padded flip handles
Large steel ball corners
#10 x 32 rack rails both front and back
Chrome plated hardware
Type: 2 lid road case
Left to right: 21 5/16" measured at ball corners
Front to back: 20 3/4" measured at ball corners
Height: 6" measured on rubber feet
Lids attached: 18 lbs.
Lids removed: 11 lbs.
Shipping weight: 24 lbs.
Warranty: 3 years covering mfg. defects
Recently Viewed Items