Cases and Hardware
Road Racks and Cases
MXC Series Mixer Cases
> MXC-M32R | Rack mount mixer case for Midas M32R mixing consoles
Click to Enlarge
MXC-M32R model shown above with lid removed and mixer mounted.
MXC-M32R | Rack mount mixer case for Midas M32R mixing consoles
Add to Cart
Add to Wish List
This is the EWI Tourcase tm Model MXC-M32R mixer case. The case is designed to have a Midas M32R mixer permanently racked in the tray at a fixed angle.
This case has 10U mixer rails with a rack rail width of 19", drilled and tapped for #10 x 32 racking screws. There is also extra room available beyond the end of the mixer rails and a cutout in the tray to allow access to rear connections. The front cutout allows access to the mixer's headphone jack.
The MXC-M32R side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The aluminum rivets on the 2 recessed padded flip handle are backed with washers to ensure strength and durability. The removable lid is equipped with 4 medium sized recessed butterfly latches and 4 ball corners. Mounted on the bottom of the case are 4 solid rubberized feet.
Heavy duty construction
Tough 3/8" plywood and ABS laminate panels
Recessed butterfly latches and padded flip handles
10U rack rails with room behind for connector access
Cutouts in tray, front and rear
Mixer remains mounted in tray
All aluminum extrusion
Steel ball corners
Chrome plated hardware
Manufactured to exacting tolerances
Road rack for Midas M32R mixers.
Type: Mixer case for Midas M32R mixer
Left to right: 18 5/8" ( 19" between rails )
Front to back: 28"
Height of tray 3 1/4"
Height of lid 7 1/2"
Left to right: 21 1/4" measured at ball corners
Front to back: 29 1/4" measured at ball corners
Height: 12 1/2" measured on rubber feet
Actual weight: 29 lbs.
Shipping weight: 36 lbs.
Dimensional shipping weight: 58 lbs.
Warranty: 3 years covering mfg. defects
Recently Viewed Items