This is the EWI IPNE-B premium balanced TRS cable featuring a right angle 1/4" Neutrik NP3RX-B on one end and a right angle 1/4" Neutrik NP3RX-B on the other. Both ends feature a black shell with gold contacts.
The Neutrik® NP3RX-B series improve on the design of the existing "C" series by offering the thinnest available A-gauge 1/4" plug on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off of the tip. The 1/4" X Series serves most needs such as guitar applications, audio cables, amplifiers and mixing consoles. These TS plugs feature a black shell with nickel contacts and are hand assembled on the cable.
The EWI premium PCB-1560 cable stock is designed to meet the needs of the most demanding professional applications. The 2 ea. 22 gauge signal conductors are each constructed of 60 strands of 0.08mm high purity annealed copper. The braided shield is constructed of 112 strands of 0.08mm tinned high purity annealed copper tightly braided to give 98% shield coverage. This high count of thin strands in the conductors and shield is to offer improved flexibility in the cable while attaining the 22ga. of the conductors and density of the braid shielding.
The outer jacket is constructed with Super Flexible Innocuous Neoprene PVC (SFIN PVC) which resists tangles and remains flexible yet durable over a wide range of temperatures. The conductor insulation is constructed of Cross-linked Polyethylene (XLPE), chosen for it's physical properties of being relatively tough, flexible, and chemically inert while offering good electrical insulation properties of high dielectric strength and very low electric conductivity.
The ends are hand assembled and soldered on the cable here at Audiopile in the USA.
Note: please call or email for lengths and configurations not shown.
