West Coast Time
Terms and Conditions
Cases and Hardware
Road Racks and Cases
Guitar and Bass Amp Cases
> FPR-100 | Road Case Suitable for Fender Princeton Combo Amps
Click to Enlarge
Model FPR-100 case shown above
FPR-100 | Road Case Suitable for Fender Princeton Combo Amps
This is the EWI Tourcase tm Model FPR-100 road case, which is a pullover style case, suitable for housing a Fender Princeton guitar amplifier.
The side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate surface. The extrusion is all aluminum and assembled with aluminum rivets. The rivets on the 2 recessed handles are backed with washers to ensure strength and durability and the inside of the case is fully lined with 1" closed cell foam rubber.
The FPR-100 case is equipped with 4 recessed butterfly latches to secure the cover to the tray and four 4" swivel casters are included, two of which are locking style. The casters mount to a 3/4" plywood caster board.
The EWI Tourcases are manufactured to exacting tolerances with excellent fit and finish. This is a well made case that is sized nicely to house one Fender Princeton combo amp, however: Check the dimensions of your amp for proper fit before ordering since your amp dimensions might be different.
Tough 3/8" plywood and ABS laminate panels
Recessed butterfly latches and padded flip handles
Large steel ball corners
4" swivel casters
Pull over style cover
Chrome plated hardware
Road case for Fender Princeton guitar amp
Type: Pullover road case for Fender Princeton combo guitar amp
Left to right: 20 1/16"
Front to back: 9 1/2"
Tray height: 2 1/2"
Lid clearance: 13 1/2"
Total inside height: 16"
Left to right: 23 3/4" measured at ball corners
Front to back: 13 1/2" measured at ball corners
Height: 24 1/2" measured on casters
Actual weight: 41 lbs.
Shipping weight: 50 lbs.
Warranty: 3 years covering mfg. defects
Recently Viewed Items