This is the EWI Tourcase tm Model DR3-3X6 tool case which is a road case with two drawers and a removable front cover. The footprint of this case is the same as our existing tool boxes (DR002H and DR002H-2T) and sits nicely on top of either of these cases. The 3 drawers of this case are the same size as the upper drawers in the DR002H cases. We also have available a 2 drawer version of this case.
DR2-2X6 (2 Drawer) sitting on top of a DR002H workbox (cases sold separately)
The DR3-3X6 side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The aluminum rivets on the 4 recessed padded flip handles are backed with washers to ensure strength and durability. The removable cover has a foam insert block to keep the doors closed during transport. The case sits on 4 large rubber feet.
The 3 drawers are mounted to the case with slide rails and are 4 1/2" deep. The 3 drawers measure 18 1/8" from front to back and 17 3/8" from left to right on the inside. The drawers are fully padded on the inside with thin close-cell foam.
We also have available "dice cut"
Pick & Pluck foam sheets cut to fit the DR3-3X6 drawers. A single set of foam consists of 2 sheets of pick & pluck and 1 sheet of egg crate foam. Each sheet of foam is 1" thick so the drawers would need four sheets to completely fill them. You can buy as many sets as you like to customize each drawer.
These are well made, heavy duty job-site tool boxes that can be used stand alone or as a companion to our DR002H series tool boxes.
