Mic, Guitar, DMX, MIDI & Adapter Cables
XLR Microphone Cables
Starline Microphone Cables
> SLMA Starline XLR Microphone Cable
Click to Enlarge
Cables are sold individually.
SLMA Starline XLR Microphone Cable
Choose Cable Length
SLMA-1 | 1 ft. - $7.15
SLMA-1.5 | 1.5 ft. - $7.70
SLMA-3 | 3 ft. - $8.25
SLMA-5 | 5 ft. - $8.80
SLMA-10 | 10 ft. - $9.35
SLMA-15 | 15 ft. - $11.00
SLMA-20 | 20 ft. - $12.10
SLMA-25 | 25 ft. - $13.20
SLMA-30 | 30 ft. - $14.85
SLMA-40 | 40 ft. - $17.60
SLMA-50 | 50 ft. - $20.90
SLMA-100 | 100 ft. - $34.10
Add to Cart
Add to Wish List
The EWI SLMA cable models are balanced 3 pin XLR type with a male XLR connector on one end, and female XLR connector on the other end.
The SLMA series of Audiopile
mic cable is what we consider the all around "workhorse" for live or studio use. Cost effective and rugged, SLMA cables will give you years of service.
These cables are constructed with the EWI Starline model BCB-2067S cable, which is a 24ga. twisted pair braided shield cable. The conductor strands are 20ea. 0.12mm diameter annealed copper. The braid strands are 96ea. 0.12mm diameter annealed copper and provide 95% coverage. The outer jacket of the cable is constructed with HFI PVC. The cable OD (outside diameter) is nominally 6.7mm (0.26").
The ends are genuine EWI ES3FB-GDP (female 3-pin XLR) and ES3MB-GDP (male 3-pin XLR). The body of these connectors are black anodized zinc and the strain relief nut is black as shown in the picture. Each cable is labeled with the length and model. The ends are hand soldered with good strain relief and are fully compatible with all other standard 3 pin XLR connectors.
These are low noise, hand assembled, quality built cables suitable for professional applications.
EWI Starline tm XLR microphone cable
High quality 2 conductor with braided shield cable
EWI ES3FB-GDP and ES3MB-GDP ends.
High performance Low impedance XLR interconnections. Typically used on:
Other XLR equipped equipment
Good choice for microphone connections or equipment interconnections.
Type: XLR microphone cable
Cable: EWI Starline model BCB-2067S, 24ga. twisted pair
with 95% coverage braided shield.
Ends: EWI ES3FB-GDP and ES3MB-GDP
Available lengths and shipping weights:
SLMA-1: 1 ft, 0.22 lbs.
SLMA-1.5: 1.5 ft, 0.25 lbs.
SLMA-3: 3 ft, 0.35 lbs.
SLMA-5: 5 ft, 0.40 lbs.
SLMA-10: 10 ft, 0.58 lbs.
SLMA-15: 15 ft, 0.76 lbs.
SLMA-20: 20 ft, 1 lbs.
SLMA-25: 25 ft, 1.15 lbs.
SLMA-30: 30 ft, 1.33 lbs.
SLMA-40: 40 ft, 1.75 lbs.
SLMA-50: 50 ft, 2.1 lbs.
SLMA-100: 100 ft, 4 lbs.
Warranty: 3 years covering mfg. defects
CR | EWI XLR Colored Rings
Recently Viewed Items