Cases and Hardware
Road Racks and Cases
RUEF Series Studio Racks without Lids
> R6UEF-16 | 6 space x 16" rack depth studio rack
Click to Enlarge
R6UEF-16 | 6 space x 16' rack depth studio rack
R6UEF-16 | 6 space x 16" rack depth studio rack
Add to Cart
Add to Wish List
The EWI Tourcase tm Model R6UEF-16 studio rack case has a 16" rack depth measured from the front rails to the rear rails. The rails are 6U (10.5") in height and are drilled and tapped for standard #10 x 32 racking screws. This rack is suitable for shallow depth, 19" wide rack gear where no lids are required.
The R6UEF-16 side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The extrusion is all aluminum and the case is assembled with aluminum rivets and steel corners. The rivets on the 2 recessed padded flip handles are backed with washers to ensure strength and durability. Mounted on the bottom of the case are 4 solid rubberized feet.
These are well made heavy duty cases manufactured to exacting tolerances and suitable for a variety of racking applications.
Designed for standard 19" rack mount equipment
6U (10.5") rack height
16" Front rail to back rail rack depth
Tough 3/8" plywood and ABS laminate panels
Padded flip handles
#10 x 32 rack rails both front and back
Chrome plated hardware
Type: Studio rack case
Front rack rail to back rack rail: 16"
Front to back: 17 3/4"
Left to right: 19 5/8"
Height: 11" measured on rubber feet
Left to right: 20 3/4" corner to corner
Front to back: 17 7/8" corner to corner
Height: 12 3/4" including 5/8" rubber feet
Actual weight: 20 lbs.
Shipping weight: 25 lbs.
Warranty: 3 years covering mfg. defects
Recently Viewed Items
Browse Similar Items