Cases and Hardware
Road Racks and Cases
RUE Series Amp or Effects Rack Cases
> R12UE-16 | 12 space 16" rack depth 2 Lid Effects or Amp Rack Case
Click to Enlarge
R12UE-16 | 12 space 16' rack depth 2 Lid Effects or Amp Rack Case
R12UE-16 | 12 space 16" rack depth 2 Lid Effects or Amp Rack Case
Add to Cart
Add to Wish List
This is the EWI Tourcase tm Model R12UE-16 rack case which has a 16" rack depth measured from the front rack rails to the rear rack rails. The rails are 12U (21") in height and are drilled and tapped for standard #10 x 32 racking screws. This rack is suitable for medium depth, 19" wide rack gear.
The R12UE-16 side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The extrusion is all aluminum and the case is assembled with quality aluminum rivets. The rivets on the 4 recessed padded flip handles are backed with washers to ensure strength and durability. Mounted on the bottom of the case are 4 solid rubberized feet.
The case is equipped with two removable lids. Each lid has four heavy duty ball corners and the inside of the RUE series lids are fully padded with medium density foam rubber. The lids are secured to the case using 4 medium sized recessed butterfly latches. Either lid will fit on either side of the case, right-side up or upside down.
These are well made heavy duty cases manufactured to exacting tolerances and suitable for a variety of racking applications.
Designed for standard 19" rack mount equipment
12U (21") rack height
16" Front rail to back rail rack depth
Tough 3/8" plywood and ABS laminate panels
Recessed butterfly latches and padded flip handles
Steel ball corners
#10 x 32 rack rails both front and back
Chrome plated hardware
Road rack for amplifiers or effects
Type: 2 lid road case
Left to right: 21 5/16" measured at ball corners
Front to back: 24 7/8" measured at ball corners
Height: 23 5/8" measured on rubber feet
Lids attached: 49 lbs.
Lids removed: 29 lbs.
Shipping weight: 67 lbs.
Dimensional shipping weight: 94 lbs.
Warranty: 3 years covering mfg. defects
Recently Viewed Items