Cases and Hardware
Road Racks and Cases
Speaker Cabinet Cases
> QSC-K8 | Road Case Suitable for two QSC-K8 Speakers
Click to Enlarge
Model QSC-K8 shown above.
QSC-K8 | Road Case Suitable for two QSC-K8 Speakers
Add to Cart
Add to Wish List
This is the EWI Tourcase tm Model QSC-K8 road case, which is a "Drop In" style case, suitable for housing two QSC K8 speakers. This case could also be suitable for other makes and models of speakers.
The side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate surface. The extrusion is all aluminum and assembled with aluminum rivets. The rivets on the 2 recessed handles are backed with washers to ensure strength and durability and the inside of the case is fully lined with 3/8" closed cell foam rubber. There is a divider in the bottom to separate and protect the two speakers.
The QSC-K8 case is equipped with 2 recessed butterfly latches to secure the hinged cover to the tray and four 4" swivel casters are included, two of which are locking style. The casters mount to a 3/4" plywood caster board.
The EWI Tourcases are manufactured to exacting tolerances with excellent fit and finish. This is a well made case that is sized nicely to house two QSC K8 speakers and possibly many other makes and models of PA speakers, however:
Check the dimensions of your speakers for proper fit before ordering.
Tough 3/8" plywood and ABS laminate panels
Recessed butterfly latches and padded flip handles
Large steel ball corners
4" swivel casters
"Drop In" style case
Fully hinged lid, speakers load from the top
Chrome plated hardware
Road case for two QSC K8 speakers.
Type: Pullover road case for various PA
speakers including QSC K8
Left to right of each compartment: 11 1/4"
Front to back: 11 1/4"
Tray height: 15 3/4"
Lid clearance: 2 1/2"
Total inside height: 18 1/4"
Left to right: 26 3/8" measured at ball corners
Front to back: 13 3/4" measured at ball corners
Height: 26 1/4" measured on casters
Actual weight: 42 lbs.
Shipping weight: 48 lbs.
Dimensional shipping weight: 60 lbs.
Warranty: 3 years covering mfg. defects
Recently Viewed Items