West Coast Time
Terms and Conditions
Cases and Hardware
Road Racks and Cases
Speaker Cabinet Cases
> QSC-K12 | Road Case Suitable for two QSC-K12 Speakers
Click to Enlarge
Model QSC-K12 shown above.
QSC-K12 | Road Case Suitable for two QSC-K12 Speakers
"Soft Caster" Upgrade - $16.00
Add to Cart
Add to Wish List
This is the EWI Tourcase tm Model QSC-K12 road case, which is a pullover style case, suitable for housing two QSC K12 speakers. This case could also be suitable for other makes and models of speakers.
The side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate surface. The extrusion is all aluminum and assembled with aluminum rivets. The rivets on the 6 recessed handles are backed with washers to ensure strength and durability and the inside of the case is fully lined with 3/8" closed cell foam rubber. The tray and lid both have dividers to keep the speakers separated.
The QSC-K12 case is equipped with 4 recessed butterfly latches to secure the cover to the tray and four 4" swivel casters are included, two of which are locking style. The casters mount to a 3/4" plywood caster board. This case also has caster cups built into the top to allow stacking of another case.
The EWI Tourcases are manufactured to exacting tolerances with excellent fit and finish. This is a well made case that is sized nicely to house two QSC K12 speakers and possibly many other makes and models of PA speakers, however: Check the dimensions of your speakers for proper fit before ordering.
Tough 3/8" plywood and ABS laminate panels
Recessed butterfly latches and padded flip handles
Large steel ball corners
4" swivel casters
Pull over style cover
Chrome plated hardware
Road case for two QSC K12 speakers
Type: Pullover road case for various PA
speakers including QSC K12
Left to right of each compartment: 14 1/4"
Front to back: 14 1/8"
Tray height: 2 3/4"
Lid clearance: 21 1/8"
Total inside height: 23 7/8"
Left to right: 32 1/8" measured at ball corners
Front to back: 16 3/4" measured at ball corners
Height: 32 1/4" measured on casters
Actual weight: 62 lbs.
Shipping weight: 75 lbs.
Dimensional shipping weight: 104 lbs.
Warranty: 3 years covering mfg. defects
Recently Viewed Items