Cases and Hardware
Road Racks and Cases
MXC Series Mixer Cases
> MXC-P24 | Rack mount mixer case for Presonus StudioLive 24.4.2 mixing console
Click to Enlarge
MXC-P24 model shown above with lid removed and mixer mounted.
MXC-P24 | Rack mount mixer case for Presonus StudioLive 24.4.2 mixing console
Included with Case
Add to Cart
Add to Wish List
This is the EWI Tourcase tm Model MXC-P24 mixer case. The case is designed to have a Presonus StudioLive 24.4.2 mixer permanently racked in the tray at a fixed angle. The design of this case utilizes the fact that the StudioLive 24.4.2 chassis side panels are drilled and tapped for the Presonus rack ear kit. We include a genuine Presonus rack ear kit with the case. This kit includes the rack ears and extra screws required to mount the ears to the mixer.
Click here for mounting instructions.
This case has 10U mixer rails with a rack rail width of 19", drilled and tapped for #10 x 32 racking screws. There is also extra room available beyond the end of the mixer rails and a cutout in the tray to allow access to rear connections. The front cutout allows access to the mixer's headphone jack. When mounted, there is a 1/2" of space between the mixer and the side panels allowing air flow from front to back on both sides. Additionally there is 1" of space front to back completely under the mixer.
The MXC-P24 side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The aluminum rivets on the 4 recessed padded flip handle are backed with washers to ensure strength and durability. The removable lid is equipped with 4 medium sized recessed butterfly latches and 4 ball corners. Mounted on the bottom of the case are 4 solid rubberized feet.
Heavy duty construction
Presonus OEM mounting hardware included
Cutouts in tray, front and rear
Tough 3/8" plywood and ABS laminate panels
Recessed butterfly latches and padded flip handles
10U rack rails with room behind for connector access
Mixer remains mounted in tray
All aluminum extrusion
Steel ball corners
Chrome plated hardware
Manufactured to exacting tolerances
Road rack for Presonus StudioLive 24.4.2 mixers.
Type: Mixer case for Presonus StudioLive 24.4.2 mixer
Left to right: 24 1/2" (between rail side panels)
Front to back: 25 1/8"
Height of tray 3 1/4"
Height of lid 5 9/16"
Left to right: 27 5/8" measured at ball corners
Front to back: 26 5/8" measured at ball corners
Height: 10 1/2" measured on rubber feet
Actual weight: 33 lbs.
Shipping weight: 41 lbs.
Dimensional shipping weight: 59 lbs.
Warranty: 3 years covering mfg. defects
Recently Viewed Items