Cases and Hardware
Road Racks and Cases
Speaker Cabinet Cases
> JBL-SRX-712M | Road Case Suitable for two JBL SRX-712M Speakers
Click to Enlarge
Model JBL-SRX-712M shown above with speakers. (Speakers not included)
JBL-SRX-712M | Road Case Suitable for two JBL SRX-712M Speakers
Add to Cart
Add to Wish List
This is the EWI Tourcase tm Model JBL-SRX-712M road case, which is a "Drop In" style case, with a fully hinged lid suitable for housing two JBL SRX-712M speakers. This case could also be suitable for other makes and models of speakers.
The side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate surface. The extrusion is all aluminum and assembled with aluminum rivets. The rivets on the 4 recessed handles are backed with washers to ensure strength and durability and the inside of the case is fully lined with 1" and 3/8" closed cell foam rubber. There is a divider in the bottom to separate and protect the two speakers.
The JBL SRX-712M case is equipped with 2 recessed butterfly latches to secure the hinged cover to the tray and four 4" swivel casters are included, two of which are locking style. The casters mount to a 3/4" plywood caster board. This case also has caster cups built into the top to allow stacking of another case.
The EWI Tourcases are manufactured to exacting tolerances with excellent fit and finish. This is a well made case that is sized nicely to house two JBL SRX-712M speakers, however:
Check the dimensions of your speakers for proper fit before ordering.
Tough 3/8" plywood and ABS laminate panels
Recessed butterfly latches and padded flip handles
Large steel ball corners
4" swivel casters
Pull over style cover
Fully hinged lid, speakers load from the top
Chrome plated hardware
Road case for two JBL SRX-712M speakers
Type: Pullover road case for various PA speakers including JBL SRX-712M
Left to right of each compartment: 10 5/8"
Front to back: 14"
Tray height: 19 5/8"
Lid clearance: 2 1/2"
Total inside height: 22 1/8"
Left to right: 27" measured at ball corners
Front to back: 17 1/2" measured at ball corners
Height: 30 5/8" measured on casters
Actual weight: 63 lbs.
Shipping weight: 73 lbs.
Dimensional shipping weight: 93 lbs.
Warranty: 3 years covering mfg. defects
Recently Viewed Items