Cases and Hardware
Road Racks and Cases
Speaker Cabinet Cases
> DUS-X10-1 | Road Case Suitable for two DUS X-10 Speakers or Similar Sized Cabinets
Click to Enlarge
Model DUS-X10-1 shown above with speakers. (Speakers not included)
DUS-X10-1 | Road Case Suitable for two DUS X-10 Speakers or Similar Sized Cabinets
This is the EWI Tourcase tm Model DUS-X10-1 road case, which is a "Drop In" style case, with a fully hinged lid suitable for housing two DUS X-10 speakers. This case could also be suitable for other makes and models of speakers.
The side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate surface. The extrusion is all aluminum and assembled with aluminum rivets. The rivets on the 4 recessed handles are backed with washers to ensure strength and durability and the inside of the case is fully lined with 1" and 3/8" closed cell foam rubber. There is a divider in the bottom to separate and protect the two speakers.
The DUS-X-10-1 case is equipped with 2 recessed butterfly latches to secure the hinged cover to the tray and four 4" swivel casters are included, two of which are locking style. The casters mount to a 3/4" plywood caster board. This case also has caster cups built into the top to allow stacking of another case.
The EWI Tourcases are manufactured to exacting tolerances with excellent fit and finish. This is a well made case that is sized nicely to house two DUS X-10 speakers, however:
Check the dimensions of your speakers for proper fit before ordering.
Tough 3/8" plywood and ABS laminate panels
Recessed butterfly latches and padded flip handles
Large steel ball corners
4" swivel casters
"Drop In" style case
Fully hinged lid, speakers load from the top
Chrome plated hardware
Road case for two DUS X-10 speakers
Type: Pullover road case for various PA
speakers including DUS X-10
Left to right of each compartment: 13 1/2"
Front to back: 13 1/2"
Tray height: 19 1/4"
Lid clearance: 2"
Total inside height: 21 1/4"
Left to right: 33 1/4" measured at ball corners
Front to back: 17 1/4" measured at ball corners
Height: 29 3/4" measured on casters
Actual weight: 70 lbs.
Shipping weight: 79 lbs.
Dimensional shipping weight: 101 lbs.
Warranty: 3 years covering mfg. defects
Recently Viewed Items