Cases and Hardware
Rack Drawers and Hardware
> BBT | Four Inch Wheel Swivel Casters, available with or without brake
Click to Enlarge
BBT-4 and BBT-4DB Shown Above.
BBT | Four Inch Wheel Swivel Casters, available with or without brake
BBT-4 | No Brake
BBT-4DB | Yes - add brake $2.00
Add to Cart
Add to Wish List
EWI Tourcase tm Model BBT-4 and BBT-4DB casters.
These are solidly built, 4" blue-wheeled, swivel casters suitable for all types of road trunks and cases. These casters are available with or without brakes. The wheels are non-marring and utilize two sealed ball bearings for a higher load capacity and longer service life. The load capacity is rated at 150 pounds per caster. The recommended mounting bolts are 5/16" or 8mm.
The brake is a friction brake and not a locking brake; therefore, the brake style casters are suitable for keeping a case from rolling on an uneven stage, but they are not intended to be a substitute for load locking a case in a truck.
If the casters are to be used on any other than EWI caster boards, some modifications may be needed to fit the casters to your particular case.
2 sealed ball bearings per wheel axle
Robust 4" swivel casters
4" Caster for equipment cases and racks.
BBT-4 (without brake)
BBT-4DB (with brake)
Mounting Plate: 3 3/4" x 2 3/8"
Mounting Holes Center to Center: 2 7/8" x 1 3/4"
BBT-4: 5 1/8"
BBT-4DB: 5 1/8'"
BBT-4: 1.7 lb
BBT-4DB: 2.0 lb
BBT-4: 2.25 lbs.
BBT-4DB: 2.5 lbs.
Color: Blue Wheel
Warranty: 1 year covering mfg. defects.
CBP Caster Bolt Pack | Mounting Bolt Set
Recently Viewed Items