Price:

   $8.00 ea. plus shipping.

• 1 ea. MXLR wired to 2 ea. 1/4" MTS Breakout
• Intended for use with EWI MP-105 MXLR to Male 1/4" TRS cable.
• Premium EWI Starline tm XLR microphone cable
• High quality 2 conductor with braided shield cable
• Durable construction
• Perfect for Stereo Guitar applications.
• Good noise rejection for an unbalanced cable.
• 1/4" MTS labeled "Left" and "Right".

• Break-out for XLR to Left and Right 1/4" TS
• Insertion application for boards or equipment equipped with XLR insertion points.
• A break-out for stereo unbalanced signals over a single standard XLR mic cable.

MP-105 shown with YMP cable above.

Note:  MP-105 cable must be ordered separately and is available in a variety of pre-made lengths.

Technical Description:

The EWI YMP-1 is a special application adaptor cable for "breaking out" a stereo TRS connection into two 1/4" Male Tip/Sleeve connections.  This adaptor cable is intended for use with the EWI MP-105 cable.  The EWI MP-105 cable is a Male 1/4" TRS on one end and a FXLR on the other end.  When the above shown YMP-1 is used with the MP-105 cable, this will allow the TRS end on the MP-105 cable to be split out (broke out) into the Left and Right channels shown on the YMP cable.

The MP-105 cable is wired as follows:

• Pin One FXLR to Sleeve of MTRS

• Pin Two FXLR to Tip of MTRS

• Pin Three FXLR to Ring of MTRS

The YMP cable is wired as follows:

• Pin One MXLR to Sleeves of both Left and Right Male 1/4" TS ends.

• Pin Two MXLR to Tip of Left Male 1/4" TS end.

• Pin Three MXLR to Tip of Right Male 1/4" TS end.

Therefore:  When MP-105 is joined to YMP, the entire pair is wired as follows:

• Tip and Sleeve of MP-105 1/4" TRS end to Left YMP 1/4" TS end.

• Ring and Sleeve of MP-105 1/4" TRS end to Right YFP 1/4" TS end.

The 1/4" MTS ends are EWI model P292-BKG

The MXLR end is an EWI mode ES3MB-GDP

The cable itself is constructed with 99.98% pure 25ga. high strand count copper conductors.