|
This is the EWI MST-103 single channel,
3 way,
transformer
isolated XLR splitter.
This is an ideal splitter for many applications,
including:
1) Splitting
XLR signals for taking a recording directly off a house mix.
2) Sending
mixed signals to multiple amp racks.
3) Splitting
XLR signals between house and monitor mixers.
4) Multiple XLR feeds for
broadcast.
The MST-103 has some nice features:
1) Durable construction and is
housed in a tough extruded aluminum case.
2) Balanced XLR inputs and outputs.
3) Ground lift switches on both of
the Isolated Split Outputs.
4) Good quality transformer for
the split.
5) The Direct Out will pass Phantom
Power. The two isolated split output do not pass phantom
power.
On the left end is the input jack
and one isolated output with the ground lift switch next to the
isolated output.
On the right end is
the direct out plus one more isolated output panel jack plus ground
lift switches for second isolated split.
Physical
properties are:
The width is 5.108".
The height is 1.730".
The front to back measurement is 3.196”.
There are 4 nice little rubber feet on the bottom to help
keep if from sliding around on a slick surface, or marring up
something you set it on.
Weight is 1.00 lbs.
The extruded aluminum case is constructed with slots and extrusion
so multiple MST-103 or the EWI LDB-101 can be fitted together semi
permanently. This is a passive device, so no active power is
required.
As well as being durable, the all-metal construction further
helps to reduce induced EMI into the unit. The panel jacks are
constructed with plastic bodies, and the FXLR input jack is
constructed with spiral
spring contact points with no locking device other than the solid
fit of the spiral spring contacts.
| 
