Computer or DJ sub mixer outputs to main mix console.
Attenuation selectable signal conversion between RCA or stereo
unbalanced Hi Z signals and XLR balanced Low Z signals.
This DI is a great item for a DJ with an RCA output sub mixer or anyone
that wants to hook a laptop output to the main mix board. It is equipped with two
RCA jacks and a parallel 1/8" stereo jack for inputs. The 1/8" jack
is wired with the ring to channel 1 and the tip to channel 2 with
sleeve to ground. On the
output side, there is one
XLR jack for each channel to send to the board. Also there is a
separate ground lift switch and a –0dB,
-20dB, -40dB attenuator switch on each input channel.
The internal splitting transformer used in
the DBRC-2A is good quality and is a key feature. The quality of the internal splitting
transformer is the key to a good performing D.I. Box.The transformers used in the EWI DBRC-2A are manufactured
to strict EWI tolerances designed specifically for this application.
box is extruded aluminum.The
box has a nice feature in that it is built so multiple boxes can be
hooked together physically either side-by-side or one on top the
other.There are 4 nice
little rubber feet on the bottom to help keep it from sliding around
on a slick surface or damage a nice surface.The box is extremely tough.