Price: $115 + shipping Actual case weight: 30 lbs.
Dimensional shipping weight: 52 lbs.
Designed for standard 19" rack mount equipment
6U (10 1/2") rack height
14" Front rail to back rail rack depth
Tough 3/8" plywood and ABS laminate panels
Recessed butterfly latches and padded flip handles
Steel ball corners
#10 x 32 rack rails both front and back
Chrome plated hardware
Road rack for amplifiers or effects
#10 x 32 Rack Screw Pack Included with each case.
R6UE-14 model shown above.
This is the EWI Tourcase
tm Model R6UE-14 rack case which has a 14" rack
depth measured from the front rack rails to the rear rack rails.
The rails are 6U (10.5") in height and are drilled and tapped
for standard #10 x 32 racking screws. This rack is
suitable for medium depth, 19" wide rack gear.
The R6UE-14 side panels are constructed with 3/8 inch hardwood plywood and
covered with a black ABS laminate finish. The extrusion is all aluminum and the case is assembled with quality aluminum rivets.
The rivets on the 2 recessed padded flip handles are backed with washers to
ensure strength and durability. Mounted on the bottom of the case are 4
solid rubberized feet.
The case is equipped
with two removable lids. Each lid has four heavy duty
ball corners and the inside of the RUE series lids are fully padded with medium density foam rubber.
The lids are secured to the case using 2 medium sized recessed
butterfly latches. Either lid will fit on either side of the
case, right-side up or upside down.
These are well made heavy duty cases manufactured to exacting tolerances and
suitable for a variety of racking applications.
Hardware details used on all RUE series cases shown
Type: 2 lid road case
Left to right: 21 5/16"
at ball corners
Front to back:
23" measured at ball corners
Height: 12 15/16"
measured on rubber feet
Lids removed: 18
weight: 52 lbs.
3 years covering mfg. defects
Shipping charges are based
on the dimensional weight of the package.