Please read the ORDERING and SHIPPING notes at the bottom of the page.

R4UE-10 $90 ea. + shipping

UPS dimensional shipping weight: approx. 28 lbs ea

• Designed for standard 19" rack mount equipment
• 4 U (7") rack height
• 10" Front rail to back rail rack depth
• Manufactured to exacting tolerances
• Recessed butterfly latches and padded flip handles
• Tough 3/8" plywood and ABS laminate panels
• Double walled aluminum edges
• Large steel ball corners
• #10 x 32 rack rails both front and back

• Road rack for shallow depth amplifiers

• Shorter rack depth design suited for FX racking

• Suitable for common rack-mount wireless receivers

Model R4UE-10 shown above

A measured drawing of this case is available by clicking on the above picture.

Technical Description:

The EWI Tourcase tm Model R4UE-10 Amplifier or Effects Rack is a 4U (7") high Road Case with a 10" "front rail to back rail" rack depth.  This is a nice sized rack for shallow amps, FX units, wireless receivers and other rack mount items that don't require a deep rack.

The rack rails, both front and back, are drilled and tapped for #10 x 32 racking screws. A pouch of rack screws are supplied with each case.

The case is equipped with two removable covers (lids).  Each lid has two heavy duty ball corners and two "dished" ball corners.  The inside of the RUE series lids are fully padded with medium density foam rubber. 

The case is equipped with 2 each medium sized recessed butterfly latches per lid to secure the lids to the case, and 2 each recessed padded flip-handles, one on each side.  The rivets on the handles are backed with backing washers to ensure strength and durability. 

The extrusion is all aluminum and double walled for added strength.  The side panels are constructed with 3/8 inch hardwood plywood with an black ABS laminate surface.   The case is assembled with good quality rivets.  There's 4 nice solid rubberized feet on the bottom. 

The case is manufactured to exacting tolerances with excellent fit and finish.  Either cover will perfectly fit on either side of the case, right-side up or upside down.  In fact, the lid for any one model of case will fit correctly on any other case of the same model.

This is a well made case, suitable for standard 19" rack mount equipment with a shallow chassis.