|
R12U-22
Price: $220 + shipping + UPS oversized charge
Actual case weight: 70 lbs.
UPS dimensional shipping weight: 124 lbs.
R14U-22
Price: $240 + shipping + UPS oversized charge
Actual case weight: 74 lbs.
UPS dimensional shipping weight: 136 lbs.
R16U-22
Price: $260 + shipping + UPS oversized charge
Actual case weight: 78 lbs.
UPS dimensional shipping weight: 150 lbs.
R18U-22
Price: $280 + shipping + UPS oversized charge
Actual case weight: 82 lbs.
UPS dimensional shipping weight: 150 lbs.
|
| Key Features: |
- Heavy duty construction
- 22" depth for extra deep equipment
- Designed for standard 19" rack mount equipment
- Four 4" swivel casters including (two are locking style)
- Manufactured to exacting tolerances
- Recessed butterfly latches and padded flip handles
- Tough 3/8" plywood and ABS laminate panels
- Double walled aluminum edges
- Large steel ball corners
- 18.25" minimum rack depth
- #10 x 32 rack rails both front and back
|
| Applications: |
|
|
Construction details shown above |
|
R16U-22 model shown above.
|
|
Technical Description: |
These are the EWI Tourcase
tm Model RU-22 Series rack cases which have a 22" rack depth
measured from the front rack rails to the rear rack rails. The
rails are available in 4 heights: 12U (21"), 14U (24.5"), 16U (28"),
18U (31.5") and are drilled and tapped for standard #10 x 32 racking
screws. These racks are suitable for
deep 19" wide rack gear.The RU-22 series side panels are
constructed with 3/8 inch hardwood plywood and covered with a
black ABS laminate finish. The extrusion is all double
walled aluminum and the case is assembled with quality stainless
steel rivets. The rivets on the 4 recessed padded flip
handles are backed with washers to ensure strength and
durability. The cases roll on 4 heavy duty 4" swivel
casters, two of which are braking style. The casters are shipped
un-mounted with all mounting hardware included.
The case is equipped
with two removable lids. Each lid has four heavy duty
ball corners and the inside of the RU-22 series lids are fully padded with medium density foam rubber.
The lids are secured to the case using 4 medium sized recessed
butterfly latches per lid. Either lid will fit on either side of the
case, right-side up or upside down.These are well made heavy duty cases manufactured to exacting tolerances and
suitable for a variety of racking applications.
R16U-22 shown above with the front and back lids removed.
|
|
