RL-4840
Case suitable for
EWI SPPX Reel Snakes
(See below for list of snake models.)
Price:  $180 + shipping
Actual case weight: 52 lbs.
Dimensional shipping weight: 60 lbs.

RL-6047
Case suitable for
EWI RPPX Reel Snakes
(See below for list of snake models.)
Price:  $200 + shipping
Actual case weight: 56.2 lbs.
Dimensional shipping weight: 90 lbs.

RL-6060
Case suitable for
EWI RPPX Reel Snakes
(See below for list of snake models.)
Price: $220 ea. + shipping + UPS oversized charge
Actual case weight: 60.3 lbs.
Dimensional shipping weight: 123 lbs.

• Heavy Duty Construction
• Manufactured to exacting tolerances
• Heavy-duty 4" casters including 2 locking type
• Recessed butterfly latches and padded flip handles
• Tough 3/8" plywood and ABS laminate panels
• Double walled aluminum edges
• Large Chromed steel ball corners.

• Road case for reel snakes:
  
   

• RL-4840  for all small form SPPX reel snakes.

   

• RL-6047 for SMALL sized RPPX reel snakes including:
  • RPPX-16x8-100
  • RPPX-16x8-150
  • RPPX-16x12-100
  • RPPX-16x12-150
  • RPPX-24x8-100
  • RPPX-24x12-100
  • RPPX-32x8-100
  • RPPX-32x12-100

   

• RL-6060 for MEDIUM and LARGE sized RPPX reel snakes including:
  • RPPX-16x8-200
  • RPPX-24x8-150
  • RPPX-24x8-200
  • RPPX-24x12-150
  • RPPX-24x12-200
  • RPPX-32x8-150
  • RPPX-32x8-150/DM
  • RPPX-32x8-200
  • RPPX-32x8-200/DM
  • RPPX-32x12-150
  • RPPX-32x12-200
     
• Road case for combo guitar amps
• Road case for amp racks

REEL MOUNTING INSTRUCTIONS

Click above link for suggestions on mounting reel snake in case

 

RL-6047 shown above with lid removed.
 

Technical Description

These are the EWI Tourcase tm model RLpull-over flight cases sized and intended for use with the EWI RPPX model reel snakes.  Currently the two models available are the RL-6047 which fits the medium sized EWI RPPX reel snakes; and the RL-6060, whichfits the large EWI RPPX reel snakes.

All RL series cases are equipped with four 4" ball and roller bearing swivel casters.  Two of the four casters are locking style casters which are equipped with foot activated and released style locking mechanisms.  The casters are shipped packed inside the case to protect them in shipping.  The bottom caster mounting boards are equipped with integrated tee-nuts and the hardware is included to mount the casters.  Mounting the casters requires a 12MM or 1/2" end wrench.

The RL series cases are equipped with 4 medium sized recessed butterfly latches to secure the cover to the tray.  These cases are also equipped with 4 recessed padded flip-handles, two each on 2 opposite sides of the cover.

The inside of the RL series cases are fully padded with 1/2" high density foam rubber. All 8 corners of the RL series cases are protected with large chromed steel ball corners.  The extrusion is all aluminum.  The side panels are constructed with 3/8" hardwood plywood with a black ABS laminate surface.  The case is assembled with good quality rivets.

These cases are manufactured to exacting tolerances with excellent fit and finish.  The cover will perfectly fit on the tray either way around.  In fact, the cover for any one model of case will fit on the tray of any other case of the same model.