|
This is the
EWI Tourcase
tm Model MXC-008 small mixer case. Currently, two models are
available, one in 10U (17.5" rack rail depth) and one in 12U (21"
rack rail depth).
The rack rail width is
19" and the rails are drilled and tapped for #10 x 32 racking
screws. This case is designed
to leave a mixer permanently racked in the tray at a fixed angle. Because of the
tray depth, the case is better suited for mixers with inputs and outputs on top, especially if the
mixer extends to the end of the rack rails. However, if your mixer
does not extend to the end of the rack rails, then access to rear mounted connections is possible when the
mixer is mounted forward on the rack rails. (See pictures below.)
The MXC-008 side
panels are constructed with 3/8 inch hardwood plywood and covered
with a black ABS laminate finish. The aluminum rivets on the recessed padded flip handle
are
backed with washers to ensure strength and durability. The
removable lid is equipped with 2 medium sized recessed butterfly
latches and 8 ball corners. Mounted on the bottom of the case
are 4 solid rubberized feet.
These are well made heavy duty cases suitable for a variety of
small mixer applications.
Rear view of an MXC-008-12 with mixer mounted shown above.
|
