These are the EWI Tourcase
tm Model CUDJ Series rack cases which have ratcheting
mixer rails mounted at the top of the case and an 18.25" rack depth
measured from the front rack rails to the rear rack rails.The CUDJ series cases build on
the success of our CU series with the added feature of
attaching the removable doors to the sides of the case to form a
tabletop. The doors house the steel table legs which fold flat when
transporting. The tables attach
to the sides with two heavy duty hooks and latches built into the
doors and sides of the case. Currently 3 models are
available: C12UDJ-P (12 space), C14UDJ-P (14 space), and
C16UDJ-P (16 space).
The slant mixer
mounting portion of the CUDJ series cases is designed to accommodate
mixers with a rack mount requirement of up to 10U (17.5"). A longer front to back
mixer of up to 21" (12U) is possible to mount in this case by
extending a portion of the mixer into the front and back lids; however, the mixer
rack rails are 17.5" long. The slant mixer rails are supported
at the back with a ratcheting tilt mechanism which allows the mixer to
be positioned at 10 different angles ranging from flat or
horizontal to a maximum slanted position of 20 degrees.
The equipment rack
rails of the CUDJ cases are actually two spaces longer than the model
number implies. Depending on your mixer height when laid flat
or horizontal in the slant top portion of the rack you may or may
not be able to use this extra rack space for racking other
equipment. If your mixer extends down into this space when
laid flat you will still have the full use of the rated rack space.
Please note:
The supplied
panel blanks or a piece of rack equipment must be installed in the
front and back rails at all times to provide rigidity to the case.The CUDJ series side
panels are constructed with 3/8 inch hardwood plywood and covered
with a black ABS laminate finish. The extrusion is all double
walled aluminum and the case is assembled with quality stainless
steel rivets. The rivets on the 4 recessed padded flip handles
are backed with washers to ensure strength and durability. The
cases roll on 4 heavy duty 4" swivel casters, two of which are
braking style. The casters are shipped un-mounted with all mounting
hardware included.
The CUDJ series cases
are
equipped with 3 lids: front, back, and top. The lids are
secured to the case using 4 medium sized recessed butterfly latches
per lid and the top lid is secured between the front and back lids. Each lid has four heavy duty ball corners and the
inside of the CUDJ series lids are fully padded with medium density
foam rubber. When the mixer rails are horizontal, there is
approximately 2
3/4" of clearance between the top of the mixer rails and the inside
of the top lid.These are well made heavy duty cases manufactured to exacting tolerances and
suitable for a variety of racking applications.
Model
C12UDJ-P with all doors closed.
View of table legs and hinge assembly.
