|
This is the
EWI Tourcase
tm Model A8UE-10 anti-shock rack case which has a 10" rack depth
measured from the front rack rails to the rear rack rails and 1"
thick closed cell foam padding between the outer case and inner rack
shell. The
rails are 8U (14") in height and are drilled and tapped for
standard #10 x 32 racking screws. This rack is suitable for
shallow depth, 19" wide rack gear.
The A8UE-10 side
panels are constructed with 3/8 inch hardwood plywood and covered
with a black ABS laminate finish. The extrusion is all aluminum and the case is assembled with aluminum rivets. The rivets on the 2 recessed padded flip
handles are backed with washers to ensure strength and durability.
Mounted on the bottom of the case are 4 solid rubberized feet.
The case is equipped
with two removable lids. Each lid has four heavy duty
ball corners and the inside of the AUE series lids are fully padded with medium density foam rubber.
The lids are secured to the case using 2 medium sized recessed
butterfly latches. Either lid will fit on either side of the
case, right-side up or upside down.
These are well made heavy duty cases manufactured to exacting tolerances and
suitable for a variety of racking applications.
|
